CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
(38 reviews)
Price: $67.54
In Stock
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
Item # CE13311
Retail:$83.99
Our Price: $67.54
You Save: 20%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (38)
- Q & A (0)
- Photos
CE Smith Trailer Hubs and Drums - CE13311
- 5 on 4-1/2 Inch
- For 2700 lbs Axles
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- Hub
- 1/2 Inch Stud
- Pre-Greased
- Standard
- L44649
- L44649
- CE Smith
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.
Features:
- Kit lets you replace 1 hub assembly on your trailer
- Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin
- Perfect for storing onboard your trailer in case of an emergency
- Pre-greased with heavy-duty, marine-grade lubricant
- Ideal for boat trailers
- Strong, cast iron hub is painted black
- Double-lip grease seal helps keep moisture out and grease in
- Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion
- Carrying case with handle keeps all the parts in one place
- Made in the USA
Specs:
- Application: 2,700-lb axles
- Maximum wheel diameter: 14"
- Bolt pattern: 5 on 4-1/2"
- Wheel studs: 1/2" diameter x 1-7/8" long
- Hub inner diameter: 1.98"
- Hub flange outer diameter: 5-1/2"
- Weight capacity: 1,350 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner and outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner and outer race: L44610
- Grease seal (included): 12192TB
- Inner diameter: 1.249"
- Outer diameter: 1.983"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
13311 C.E. Smith Trailer Hub Kit - Straight Spindle - 5 x 4.5 Stud Pattern - 1,350-lb Capacity
California residents: click here
Customer Satisfaction Score:
74% were satisfied with this product
26% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased - CE13311
Average Customer Rating: 4.4 out of 5 stars (38 Customer Reviews)
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.by: Andre09/22/2022
I am sure the product is of average quality, however when you purchase multiple items from etrailer (some of substantial weight) and they box everything together without any packing materials to keep fragile items safe, the comfort and likeness of purchasing items through this retailer drops. Brought this up with their customer service, and they said it was packed properly.
by: Aaron09/20/2021
The hub is packaged in a case so they can be carried as a spare. But for some reason the box mine is packaged in is damaged and won’t stay shut. Kind of makes me wonder if the hub is going to fit in work in an emergency situation. I don’t know?
by: Brian07/27/2023
Had the wrong seal installed. Customer service was great and are sending the correct seals out.
by: Dee Dee05/20/2023
Had a little damage to the case when it arrived, but they immediatly sent me a new case. They have good customer support. I hope I don't need to use the hub anytime soon. It will be backup for a 800 mile trip I will take to Florida. Having it for backup is great piece of mind. Thank you etrailer!
by: Thomas 10/09/2022
Great price, product is well made. Quick shipping, customer service was fantastic. Thanks
by: Kyle07/25/2019
All parts were exactly as expected. The reason I took one star away is because of the “pre-greasing.” Yes the hub had grease but the bearings were not packed at all. I could completely see through the gaps and had to remove and grease pack each one before installing.
Kyle
7/25/2020
Since installation the hubs and bearings have worked flawlessly. I haul my boat to and from local ponds and have never once had an issue. I would definitely recommend these products and this company.
by: Jess 06/16/2021
If you own an older trailer, or are having issues with hubs on your trailer, then you owe it to yourself to purchase this hub assembly! It was a simple process to swap out out "the old for the new". As always, the etrailer people are there to provide help for you if necessary.
Jess L.
6/17/2022
Everything is still working A-OK ! Simple solution for a pain in the a__ problem ! And the price was right, too. Just remember to check and grease fittings when necessary.
by: Jeff S07/11/2016
First of all, let me start by saying that the product I ordered and received was exactly what I needed and the price point was very agreeable. Your site was very comprehensive with the number of products for varying applications.
What was the most beneficial to me was that you had a toll free customer support line that I utilized. First of all the representative that answered my call was polite and professional. I would also like to impress upon you that it was the knowledge of this particular gentleman (I can recall his name) that helped me make my decision.
I have several trailers and I know the inner workings of them very well but I learned something from your staff member to make my decision making process easier and more decisive.
I can see that the management has chosen their staff wisely and trained them well. It is for this reason that I seek out businesses such as yours to do business with.
I would just like to conclude in saying, congratulations on your success and I wish you the best in the future. Keep up the good work.
by: Daniel06/17/2018
The pre packed bearings and hub kit worked out great, yout Tech’s really helped me with my spacer problem. The new wheels and tires really look good. I still have to road test to see if I got the hubs bearing clearance correct. Will definitely do business with from now on. Your service is very professional.
by: Tom12/04/2018
Fits my boat trailer well and comes in a nice compact container. This is a great product for my upcoming cross country trip. Any bearing problem can be quickly repaired on the side of the road by just removing/reapplying lug nuts, cotter pin and castle nut. It should be a 15 minute fix instead of waiting hours for costly tow. Well worth $53.
by: Vsevol005/05/2023
Have it in your truck when towing.
by: Dave E10/01/2018
I recently had a hub failure on my boat trailer. etrailer was able to help me identify the correct replacement parts needed and the parts shipped same day. Parts arrived next day in perfect condition. Thanks for the great customer support!
by: Trent08/10/2021
Purchased two hub assemblies. Both hubs arrived with bearings that had only a small amount of grease. Both will need to be repacked. Paint is chipped off in many places on one hub.
by: Michael11/22/2018
Bought two for my popup. Fit perfectly! Only reason for 4 stars is one of the packs didn’t have a cotter pin.
by: Darwin09/02/2017
Liked the way it came in a hard case. Will be used as a back up for my boat trailer should I burn one up on the road.
by: Barry08/10/2022
Yep this one is perfect ! Thank you for the great customer service
Heather A.
8/17/2022
Oh man! This hub definitely comes in a carrying case so I am not sure why that happened. I sent your review to customer service to assist you.
by: Derek07/26/2019
Easy website to maneuver. Product fit as it said it was. Seems to be a very high quality product. Shipped in a thimly matter. Very satisfied
by: Warren A.10/18/2015
Good part. Excellent customer service and quick delivery.
by: Alfred01/18/2018
Excellent customer service. Quick delivery. Returns accepted, refund granted, return shipping at no charge.
Couldn't ask for more!!!!
by: Greg08/30/2017
Exactly what I needed at the correct price. Shipping was fast and packaged well. Solved my problem and kept me on the road.
by: Mark K12/16/2021
Thank you so much Chelsea!
I receive the hubs in record (1 day time) which was a pleasant surprise. Cudos to you on job well done.
Thanks again and you have a wonderful Christmas and Happy New Year! from Chicago
by: Patrick 09/28/2017
The customer service blows me away. so much knowledge, responsive, easy to find references, I can't say enough good things.
by: Cory 08/13/2022
Came quickly and exactly as advertised
by: David 12/06/2020
fast delivery
product was as adver tised
by: Stephanie 07/03/2020
Perfect fit. Awesome service.
25
38
Show More Reviews
See what our Experts say about this CE Smith Trailer Hubs and Drums
- Needing EZ Lube Boat Trailer Hub With 1.25 Inch ID Grease Seal and L44649 BearingsWe don't offer a hub kit that meets all the parameters you mentioned, we have a couple of options that would work. Your boat trailer used an oddball hub/spindle combination, which was used by Ranger and a couple of other boat manufacturers with the idea being that you could only get the replacement parts from them. We do have an option, but you'd need to purchase the correct EZ Lube grease cover separately. The CE Smith Hub Assembly, part #CE13311 is compatible with 8 to 12 inch wheels....
view full answer... - Replacing Short Hubs On A 1996 EZ Loader Trailer With Straight SpindlesIt does sound like your bearings are a # L44649 (1.063" inner diameter). If they are original to the trailer they may be pretty worn, which is why your measurements may be off by a few hundredths. Also the seal # 34823 that can be used with the hub # CE13311 is a 1.249" ID so I think we are on the same page there. The hub # CE13311 uses the correct bearings and seal, but it is is 4 1/8" from the outside of the inner bearing to the outside of the outer bearing. Virtually all of the hubs...
view full answer...
- Pre-Greased Trailer Hub Recommendation to Fit Spindle thats 1-1/6 inch and 5 Bolt PatternWe have the CE Smith hub part # CE13311 which fits your spindle and comes pre-greased. It also has the bolt pattern of 5 on 4-1/2 inch like you'd need as well.
view full answer... - Which Trailer Spindle For CE Smith Hub CE13311For the CE Smith Trailer Hub Assembly # CE13311 you'll need a spindle for a 2,700 lb axle. We don't have one that works with that hub, but you'll just need to look for one that uses bearings L44649 for both the inner and outer bearing. Importantly, also be sure that the spindle is compatible with grease seal 12192TB, which has a 1.249" inner diameter, because there are spindles that are compatible with the L44649 bearings but don't have the right dimensions for the seal.
view full answer... - Does CE Smith Trailer Hub Assembly Come With Grease CapWhile I'm not 100 percent certain what part you are referring to specifically in regards to grease fitting, the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13311 comes with the grease cap and grease seal, along with the bearings, races, lug nuts, cotter pin, and carrying case.
view full answer... - Recommended Replacement Idler Hub for Karavan Boat Trailer with L44649 BearingsIf you're just looking for an idler hub, the CE Smith Trailer Hub Assembly with Carrying Case part # CE13109 for 4 on 4" or part # CE13311 for 5 on 4-1/2" are a great pre-greased option with carry case so you can keep one nearby when ready to use.
view full answer... - Will the CE Smith Trailer Hub Fit a Shorlander Trailer 2800lbYes, the CE Smith Trailer Hub Assembly, # CE13311, will work well on your Shorelander trailer axle. The hubs will come pre-greased and ready to install. The hub has a 5 on 4-1/2 inch bolt pattern and will include a dust cap and new lug nuts.
view full answer... - Pre-Greased Trailer Hub for a Spindle that Requires L44649 Bearings and a 1.25 Inch SealYes, in the picture you submitted it states the spindle accepts hubs that use L44649 bearings with a seal inner diameter of 1.25 inches. The CE Smith hub assembly # CE13311 does indeed match that criteria and will fit the spindle.
view full answer... - Compatibility of Grease on CE Smith Trailer Hub AssemblyFrom what I have found, the StarBrite Marine Grease you are talking about has a Lithium Complex base type. The grease used in the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13311 is a Calcium Sulfonate Complex base type. Based on this information the two are compatible so you will not have any issues using them together.
view full answer... - Replacement Idler Hub for Continental Boat TrailerWhen I did a google search on the 125197250 number you provided, it keeps taking me to the L44649 bearing. is the surface of the spindle that the inner and outer bearing ride upon the same diameter? You could take a digital caliper like # PTW80157 on the spindle surface where the 125197250 bearing rides. If it's right around 1.06 inches, then it's a L44649 bearing. Different manufacturers can refer to the same bearings using different reference numbers. If the spindle doesn't have a taper...
view full answer... - Depth of CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb AxleThe depth or length of the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles # CE13311 that you referenced is 4 inches.
view full answer... - Replacement Hub Assembly For EZ Loader Trailer Hub 300-020883You will need the CE Smith Trailer Hub Assembly # CE13311 for a replacement hub on your EZ Loader Trailer with hub 300-020883. Your hub uses a grease seal that has an inner diameter of 1.249". The CE Smith Trailer Idler Hub Assembly # CE13315 that you found has a grease seal that has a 1.50" inner diameter.
view full answer... - What Type of Grease Comes in CE Smith Pre-Greased Trailer HubsThe CE Smith trailer hubs we offer that are pre-greased like the part # CE13311 come with the LMX Red grease like the # L11390.
view full answer... - Recommended Hub Assembly for L44649 Inner/Outer Bearings and Grease Seal with 1.25 Inner DiameterIf your existing hubs use the # L44649 inner and outer bearings, which do match up to the spindle measurements you provided, then the common grease seal that is used is indeed the # 10-9, which has an inner diameter of 1.500 inches. With that being said, we do have one idler hub assembly available that uses the # L44649 inner and outer bearing, along with a grease seal that features a 1.249 inner diameter. This is with the CE Smith Trailer Hub Assembly # CE13311. This is actually a pre-greased...
view full answer... - How To Find The Correct Wheel Bearings For A 2016 Triton LT WCII Tandem Jetski Trailer The best way to find the correct wheel bearings needed for your 2016 Triton LT WCII Tandem Jetski Trailer will be to pull a wheel and hub off the trailer and find the numbers on your current wheel bearing. With the wheel bearing numbers, you will be able to check the attached link and match the correct bearings you will need for your axle. If your bearings do not have numbers or the numbers have worn off, you will need to measure the inside diameter of the bearings and the seal using...
view full answer...
- Trailer Hubs for a 2500 Pound AxleIt sounds like you might have a BTR spindle such as # TRU44FR as an example. It takes bearing L44649 for the inner and outer bearing. We have a couple of hubs that you could use. As a bonus they are pre-greased and ready to go! We have # CE13109 with a 4 on 4 bolt pattern. And we have # CE13311 for a 5 on 4-1/2 bolt pattern. These are the only option rated high enough for a 2500 pound axle. There are no galvanized options at that weight capacity. There are some in the 2200 pound axle...
view full answer... - Replacement Trailer Hub for an EZ-Loader Boat TrailerThanks for the photo! Using the VIN I was able to gather the necessary information needed to help you find the correct idler hubs. For this, I recommend the CE Smith Trailer Hub Assembly part # CE13311. This hub uses a L44649 inner/outer bearing, 12192TB grease seal, and has a 5 on 4-1/2" bolt pattern. This will be a direct replacement for the idler hubs you have on your trailer now and even comes pre-greased. I have attached a review video for you as well.
view full answer...
- Recommended Replacement Hub for a Boat Trailer That Has LM11949 and 25580 BearingsThe bearings that will match your measurements will be the # LM11949 (.750") and the # 25580 (1.750"). With that being said, we do not have a hub that will match those sizes. They are also not a combination I have heard of, so this may be a case of an older trailer using something that is not used anymore. Unfortunately this does happen fairly often and the only real way to fix it, is to replace the axle. The Dexter Axle # T20BTR-7258 will have a 2,000 pound capacity and will measure 72...
view full answer... - Recommended Hub And Drum Assembly For With A Outer Bearing L44649 And Inner Bearing L68149When it comes to replacing your hub and drum that has an outer bearing # L44649 and an inner bearing # L68149 The Dexter Trailer Hub and Drum Assembly for 3,500-pound E-Z Lube Axles - 10 inch Diameter - 5 on 4-1/2 # 84546UC3 will work for you. This hub and drum has an E-Z Lube-compatible grease cap that makes it easier to lubricate the bearings. The grease cap flange diameter is 1.986 inches and has a wheel bolt diameter of 1/2 inch. All bearings, races, grease seal, grease cap, wheel...
view full answer... - Replacement Hubs for 2,700 lb AxleBased on your photo it looks like you have 2,700 lb axles, and we do have hubs for that size axle. However, you will need to confirm the bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper to measure your spindle to the thousandths of an inch where the bearings...
view full answer...
- Replacement Idler Hub for 2001 EZ-Loader Boat Trailer with 5 on 4-1/2 Inch HubsThank you for your VIN. I was able to use this and determine that you need the CE Smith Trailer Hub Assembly part # CE13311 which comes pre-greased.
view full answer... - Replacement Hub Recommendation for EZ Loader Boat Tariler with 5 Lub WheelsThanks for the photo! Using the VIN I was able to gather the necessary information needed to help you find the correct idler hubs. For this, I recommend the CE Smith Trailer Hub Assembly part # CE13311. This hub uses a L44649 inner/outer bearing, 12192TB grease seal, and has a 5 on 4-1/2" bolt pattern. This will be a direct replacement for the idler hubs you have on your trailer now and even comes pre-greased.
view full answer...
- Replacement Hub for a 2005 Trailstar PT175The CE Smith trailer hub # CE13311 is likely going to work for your 2005 Trailstar PT175. But to be absolutely sure you can check the inner and outer bearing numbers stamped into the sides of the bearings. If they are L44649 bearings then the CE Smith hub will fit.
view full answer... - Recommended Hubs for 80's Shorelandr Boat Trailer with 5 Bolt Hubs and 8" WheelThe CE Smith Trailer Hub Assembly part # CE13311 will be a fit for your 1989 Shorelandr boat trailer. These hubs use L44649 bearings, a 5 on 4-1/2" bolt pattern, and will work with 8" wheels. They will then work with the CE Smith Bearing Protectors part # CE16271 if you want to opt for easy greasing. The hubs are pre-greased so you don't have to worry about packing the bearings.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
9/30/2021
Customer service will be reaching out to you.